News | stainless steel jacketed reactor

High Speed Disperser Blades | JCT Machinery

High speed disperser blades, also called dispersion discs, is a key component used to disperse and evenly suspend solid particles or liquid mixitures in liquids. These high speed disperser blades are usually located on the main shaft of a high speed dispe

Mar 26,2024

Dry Powder Blending Machine: Vertical Ribbon Mixer | JCT Machinery

Design of Vertical Ribbon Mixer 1. Transmission System Double vertical ribbon mixer has the rotation motion of the spiral shaft and the revolution motion of the rotating arm along the cylinder wall. The revolution and rotation adopt separate transmi

Mar 25,2024

Liquid Silicone Rubber | JCT Machinery

What is liquid silicone rubber? Liquid silicone rubber (LSR) is typically made up of two main components: a liquid silicone polymer and a catalyst that initiates the curing process. Characteristics of Liquid Silicone Rubber 1. Flexibility and

Mar 22,2024

Different Kinds Of Silicone Sealant | JCT Machinery

What is silicone sealant? Acidic silicone sealant and neutral silicone sealant are both used in construction. However, acidic silicone sealant is slightly corrosive to steel, cement, stone, etc. due to the presence of acidic components, so its applicat

Mar 21,2024

Neoprene Adhesive Manufacturing Equipment and Process | JCT Machinery

What is neoprene adhesive? Neoprene was the first synthetic rubber compound to be mass-produced. As an adhesive, neoprene adhesive had a wide range of applications. It has the characteristics of large initial adhesion and high bonding strength. It is m

Mar 20,2024

Dry Powder Blending Machine: Conical Screw Mixer and Horizontal Ribbon Blender | JCT Machinery

What is dry powder blending machine? Conical Screw Mixer : This type of mixer is suitable for mixing and stirring dry powder and granular materials, including powders, granules, crystals, etc. Conical screw mixer features one or more spiral-sha

Mar 19,2024

What Should I Do If Sigma Mixer Leaks Oil? | JCT Machinery

1. Check Seals First check the seals of sigma mixer, including shaft seals, sealing rings, etc., to ensure that they are not worn, aged or damaged. If any problem is found, replace the seal in time. 2. Check Bearings Check sigma mixer's beari

Mar 18,2024

Sigma Mixer Shaft Wear Repair | JCT Machinery

Why is there wear and tear? Wear on the bearing positions and bearing chambers of sigma mixer is generally caused by component dimensional tolerances, assembly processes, and wear in heacy-load operating environments. Once wear occurs, it will inevitab

Mar 15,2024

Common Faults And Solutions Of Sigma Mixer | JCT Machinery

1. Sigma Mixer Motor Cannot Start Normally or Runs Unstable Power Failure : Check whether the power cord is in good contact and whether the power switch is turned on. Motor Failure : Check whether the motor has circuit or winding open ci

Mar 14,2024