Welcome to Reactor project manufacturer from Foshan JCT Machinery Co.,Ltd.

0086-13929992673

[email protected]

Home > News

News
Hot Products
Contact us

Email: [email protected]

Phone:0086-13929992673

Address: Wufuwei Industrial Zone, Pingzhou Nanhai,Foshan City, Guangdong Province,China

    Precautions for cleaning of horizontal ribbon mixer

    Precautions for cleaning of horizontal ribbon mixer

     Neoprene equipment maintenance method

    Neoprene equipment maintenance method

    At present, there are many equipments for auxiliary production in industrial production, which not only improve production efficiency, but also reduce the waste of human resources. The following introduces how to maintain the complete set of neoprene adhesive equipment when it is used.

    Alkyd resin production process

    Alkyd resin production process

    Alkyd resin is a condensation of polyhydric alcohol (usually glycerin, trimethylolpropane, trimethylolethane, pentaerythritol, etc.) and polybasic acid (mainly phthalic anhydride, isophthalic anhydride, trimellitic anhydride, etc.) It is a kind of polymer compound with polyester as the main chain and fatty acid as the side chain.

    Waterborne acrylic emulsion process introduction

    Waterborne acrylic emulsion process introduction

    reparation of water-based acrylic emulsion: Add all acrylic monomers, emulsifiers, and water in the raw materials including acrylic hard monomers, acrylic soft monomers, and acrylic functional monomers to the Jinzong emulsification kettle to emulsify them. Obtain a non-stratified emulsion;

    Production Process of making silicone sealant:

    Production Process of making silicone sealant:

    A. Basic material production system: Put the 103 glue and other material into the dispersion mixer, operating with Heat transfer oil heating system and Vacuum system, mixing about four to five hours.

    The story behind a curtain that strikes back as a museum exhibit

    The story behind a curtain that strikes back as a museum exhibit

    Today, the editor will tell you some fresh legendary events. On May 17, 2020, a net red curtain in Wuhan will be permanently collected by the Hubei Provincial Museum. What kind of curtains can have such a charm?

    3.How to maintain the reactor?

    3.How to maintain the reactor?

    Hello, your editor today is online, and today I will continue to update your little knowledge of maintaining the reactor.

    2.How to maintain the reactor?

    2.How to maintain the reactor?

    The previous editor has explained the installation and sealing of the kettle body and kettle cover, and the relevant knowledge of the device. Today, the editor continues to bring you the explanation of the installation of valves, pressure gauges and safety valves.

    1.How to maintain the reactor?

    1.How to maintain the reactor?

    (1) Installation location: The reactor should be installed in a high-pressure operation room that meets the requirements of explosion-proof. When multiple reactors are equipped, they should be placed separately. Each two should be separated by a safe explosion-proof wall. Each operation room should have Passages and exits to the outside ensure that the equipment is well ventilated.

    hot melt adhesive reactor-mixing tank

    hot melt adhesive reactor-mixing tank

    The main characteristics of pressure-sensitive hot melt adhesives and PUR hot melt adhesives are large viscosity and high bonding strength. At present, the commonly used production equipment is mainly reactors, so the overall strength requirements of hot melt adhesive reactor equipment are high , High mixing rigidity and uniformity, and high heating efficiency requirements. There are many differences between hot melt adhesive reactor equipment and other products' reactors, which must be consider