News | stainless steel jacketed reactor

hot melt adhesive reactor-mixing tank

The main characteristics of pressure-sensitive hot melt adhesives and PUR hot melt adhesives are large viscosity and high bonding strength. At present, the commonly used production equipment is mainly reactors, so the overall strength requirements of hot melt adhesive reactor equipment are high , High mixing rigidity and uniformity, and high heating efficiency requirements. There are many differences between hot melt adhesive reactor equipment and other products' reactors, which must be consider

May 14,2020

1.How to maintain the reactor?

(1) Installation location: The reactor should be installed in a high-pressure operation room that meets the requirements of explosion-proof. When multiple reactors are equipped, they should be placed separately. Each two should be separated by a safe explosion-proof wall. Each operation room should have Passages and exits to the outside ensure that the equipment is well ventilated.

May 13,2020

What kind of hot melt adhesive can be used on electronic components?

Hot-melt adhesive is a relatively common adhesive that can be used to bond leather, plastic and fiber substrates, but did you know that hot-melt adhesive can also be used in industrial manufacturing, especially the bonding of electronic components .

May 12,2020

high speed disperser|high speed disperser for paints|high speed disperser manufacturers

Before driving 1. Check whether the oil level of the dispersion engine is filled to the specified position, the low should be added to the specified oil level, and the high should be placed to the specified position. 2. Check whether the tightness of the V-belt is proper. 3. The impeller should be rotated flexibly with no friction. 4. Check whether the fasteners are loose and whether there is any leakage in the sealing parts. 5. Turn on the main motor of the disperser and check whether the rotat

May 11,2020

Several types of common dispersers

Emulsifying and dispersing machine: emulsifying and dispersing machine, suitable for laboratory stirring, dissolving and dispersing various liquids, and experimental equipment for dissolving, dispersing and grinding high-viscosity materials, widely used in dispersion experiments of various pigments and coatings . The working principle of the emulsifying and dispersing machine is to make the fineness distribution of the material uniform by emulsifying, mixing and dispersing the material, and to a

May 09,2020

Disperser-High Speed Disperser

Disperser is a kind of mixer in a broad sense. Because the use of high-speed agitators can form strong turbulence locally, it usually has a strong dispersion and emulsification effect on the materials. The dispersing machine is mainly divided into lifting type dispersing machine and kettle dispersing machine. The lifting type dispersing machine can be divided into hydraulic lifting dispersing machine, pneumatic lifting dispersing machine, manual lifting dispersing machine, etc.

May 07,2020

Stainless steel polyurethane reaction kettle

The reaction kettle is a typical main reaction equipment in chemical production, and is widely used in the production of chemical products such as resins, adhesives, paints, cosmetics, and pharmaceuticals. Through stirring, heating and cooling, a variety of materials are dispersed and mixed to carry out reaction polymerization. Its structure is generally composed of kettle body, transmission device, stirring device, heating device, cooling device and sealing device. Corresponding auxiliary equip

May 05,2020

Do you know the main components of hot melt adhesives?

EVA hot-melt adhesive is a solvent-free, 100% solid fusible polymer; it is a solid at room temperature, heated to a certain temperature and becomes a fluid with a certain viscosity. The melted EVA hot melt adhesive is light brown or white. EVA hot melt adhesive is mainly composed of basic resin, tackifier, viscosity regulator and antioxidant.

Apr 30,2020