Applications of Paint production line

A paint production line is a manufacturing setup designed for the production of various types of paints, coatings, and related products. The applications of a paint production line are diverse, as paints and coatings are used in numerous industries and for various purposes.

1. Integrated production line equipment configuration (equipment size, quality according to the quantity of production):

1) High speed machine
2) Horizontal sand mill
3) Vacuum system
4) Paint mixing kettle
5) Fast open bag filter,
6) Paints filling machine

The specific configuration is based on the actual needs.

Despite facing strict environmental regulations and technological challenges, the continued demand for innovation and high-quality products will drive the prospects of paint production lines. With advancements in technology and market development, paint production line manufacturers may consider investing in more environmentally friendly, efficient, and automated production lines to meet the growing market demands.

The equipment can independently complete the dispersing and grinding, refining, cooling, filtering, vacuum suction, semi automatic filling the whole process, greatly reduce the labor intensity, the production time is the traditional equipment consuming 1 / 5, shortening the processing time, and easy cleaning. The utility model can be operated in a vacuum state, with no bubble production, no dust flying, and the quality of products is greatly improved.

2. Process

1) Pulp part:
The solvent through the liquid metering device is added to the liquid material groove, by vacuum suction to emulsifying kettle, start low speed anchor mixer, the powder material is sucked into the vacuum emulsifying tank for continuous stirred 10 minutes, then turn on the two sets of vertical high shear emulsifying 10 minutes, finally use horizontal emulsion machine, continuous cycle 30 minutes, finished slurry. A high shear inside the tank and an emulsion pump outside the tank are also used, ensure further refinement of materials, and greatly shorten the operation time.
2) Paint part:
By vacuum, resin, film-forming agent from the liquid tank into the low-speed stirred tank, slurry through the bag filter is sucked into the low-speed mixer, the emulsion or solvent, additives, slurry mixing, then adding additives (thickener), blending paint.
3) Filter packing:
After a good tune paint, vacuum defoaming after 5 minutes, stirring was stopped by a bag filter coating to semi-automatic filling machine for packaging. When the coating material using a two bag filters, can be switched with each use, does not affect the filling speed.

Process can vary based on the type of paint and specific manufacturer requirements.

3. FAQ

4. Our Service

1. Architectural and Decorative Paints:

Interior and exterior house paints
Wall and ceiling coatings
Primers and sealers
Specialty decorative paints (e.g., textured, metallic, chalkboard)

2. Automotive and Transportation Industry:
Automotive coatings for cars, trucks, and motorcycles
Refinish coatings for repairing and repainting vehicles
Industrial coatings for buses, trains, and commercial vehicles

3. Industrial and Protective Coatings:
Industrial primers and topcoats
Anti-corrosion coatings for metal structures and equipment
High-temperature coatings for machinery and equipment
Chemical-resistant coatings for tanks and pipelines

4. Wood Coatings and Finishes:
Wood stains and varnishes for furniture and flooring
Clear coatings for wood protection and aesthetics
Specialty wood coatings (e.g., for outdoor decking, boat finishes)

5. Packaging and Labeling:
Inks and coatings for packaging materials (e.g., flexible packaging, labels)
Coatings for food and beverage cans
Security and anti-counterfeiting inks and coatings

6. Construction and Infrastructure:
Concrete and masonry coatings
Road marking and traffic paint
Roof coatings and sealants
Floor coatings for industrial and commercial spaces

7. Furniture and Cabinetry:
Coatings for furniture, cabinets, and millwork
Specialty finishes (e.g., lacquer, polyurethane, acrylic)

8. Artistic and Specialty Coatings
Artists' paints and mediums (acrylics, oils, watercolors)
Specialty coatings for art restoration and conservation

9. DIY and Consumer Products:
Consumer-grade paints and coatings for DIY projects
Spray paints and aerosol coatings for various applications

1) JCT mechanical equipment Co., Ltd. is a research, development, design, manufacture, installation, debugging in one of the chemical machinery and equipment manufacturers, Have experience in design and manufacture of paint production equipment more than 15 years.

2）Paint equipment produced by JCT company,Well made,Reasonable structure,Easy to operate,It is suitable for producing all kinds of solvent - based paint and water - based coatings.

1）1-5 tons / day paint production line;
2）5-10 tons /day paint production line;
3）10-20 tons / day paint production line;
4）20-50 tons / day paint production line;
5）It can be designed according to the actual needs.

Contact information:

If you need to know the detailed equipment configuration, production technology, production
process, please contact us.

website ： www.nhjct.cn

Email：[email protected]

Mobile: 0086-13929992673(WhatsApp)

18028192316

Address: Wufuwei Industrial Zone,Pingzhou,Nanhai,Foshan,Guangdong,China