Rubber Kneader Maintenance Methods

1. Keep The Machine Clean

Keeping the rubber kneader clean is the basis of maintenance. During use, clean the dust and dirt on the surface of the machine frequentle. You can use a soft cloth or brush to clean. At the same time, all parts inside the rubber kneader should be cleaned regularly, especially places where dust easily accumulates. You can use compressed air to clean away dust, but be careful not to damage the internal parts of the machine.

2. Lubricate Machine Parts

The part of the rubber kneader will generate heat due to friction during use, so lubricating oil needs to be added to the machine parts regularly. The type and usage of lubricating oil shoule be selected according to the requirements of the machine. Generally speaking, lubricants are required to have good wear resistance and high temperature resistance. Before adding lubricating oil, clean the dirt on the surface of the rubber kneader parts, and then add an appropriate amount of lubricating oil according to the requirements of the machine manual.

3. Regular Inspection And Machine Maintenance

Regularly checking the maintenance status of rubber kneader is an important part of maintenance. The inspection interval can be determined based on the frequency and usage of the machine. The inspection content includes the machine's electrical system, transmission system, hydraulic system and other aspects. For any abnormality, repair or replace parts in time to ensure the normal operation of the rubber kneader.

4. Pay Attention To Safe Use

While maintaining your rubber kneader, you should also pay attention to its safe use. Before using the kneader, you must first understand the usage and precautions of the machine, and operate it strictly in accordance with the requirements. It is also necessary to regularly check whether the machine's safety devices are intact to ensure that accidents can be prevented in time.

5. Use The Machine Rationally

Reasonable use is also one of the important aspects of maintenance. During use, follow the usage specifications of the rubber kneader, do not overload the machine, and avoid frequent starts and stops to avoid damage to the machine.