JCT reactive hot melt adhesives production line

1.The reactive hot melt adhesives production line characteristic：

1）The hot melt glue production line of our company uses reaction kettle and extruder machinery. It can use to make all kinds of stick hot melt adhesive., with good mixing effect,quality stable, stick adhesive uniformity,product bright and transparency is very good.

2）It can manufacture with large capacity machinery and 24 hours of continuous manufacture. High quantity and high efficiency.

3）Raw material can be fully mixed and fully plasticized in the reaction kettle, to sure the quality of the adhesive. Reaction kettle can be used to produce various requirements and high quality hot melt adhesive

4) Extruder machine with frequency control,automatic temperature control, rapid replacement of model head, water cooling effect is fast and efficient, automatic cutting

5）Through the cold water machine, the cooling water temperature maintained at 5-10 degrees C, improve the cooling effect and production efficiency.

2、The configuration of reactive hot melt adhesives production line（Machinery size and quantity according the output to design）

1）Melt reaction kettle 1set

2）Material storage kettle 1set

3）High viscosity discharge pump 1set

4）Filter system 1 set

5）Heating system 1set

6）Extrusion forming machine 1set (can be design according your requirement)

7）cooling tank 1set

8）cooling-water machine 1set

9）Full automatic traction and cutting machine 1 set

3、Production proccess (production technology)

1）According the formula to weighing the raw material, and then adding into the reaction kettle,heating to melt raw material,fully mixing.

2）Moving the melted raw material into the filter,and the into the material storage kettle, cooling the material into a certain temperature,and maintain the temperature

3）Moving the storage kettle material into extruder . According the type of the adhesive to choose the extruder speed

4）Extruder to hot melt adhesive through an extrusion head extrusion hole squeeze into the water tank, hot melt adhesive meets cooling water immediately setting. The speed of the glue stick in the water tank by extruder extrusion speed control. Synchronous traction speed and extrusion speed of extruder.

5）Adjust the extrusion speed, cooling rate, traction speed, to control the size of the adhesive stick.

6）Choose the suitable length of the adhesive stick ,cut off them and package.

4、FAQ about reactive hot melt adhesives production line:

Q:How many shape of reactive hot melt adhesives?

A:The hot melt adhesive can be divided from product shape:lump,granular,bar and powder.

Q:What is the heating way of hot melt adhesives?

A:Jacket electric heating, electric heating oil, oil furnace (oil, gas).

Q:How about the temperature of HTF and inner kettle materials?

A:HTF temperature control 160-200, and inner kettle materials will control 130-160.

Q:How long does the reactor and kneader for hot melt adhesives manufacture in a batch?

A::Reactor produce hot melt adhesives about 4-5 hours /batch, kneading machine production of hot melt adhesive is about 2-3 hours /batch.

The application of reactive hot melt adhesives :

1) Package: carton boxes, food packaging;

2) Hygiene products: diapers, sanitary napkins and so on.

3) Binding books: books wireless binding;

4) Wood furniture: plywood, wooden floor mosaic, furniture stick;

5) Automotive: lights, glass, filter device, interior, etc;

6) Textile products: adhesive, printing, adhesive;

7) Reflective material: traffic signs, warning protective clothing.

The drawing of JCT reactive hot melt adhesives production line:

The technical parameter of reactor:

1）Equipment volume: 20-50000L (volume in accordance with the requirements of the

design.)

2 ) Reaction temperature : -20℃~300℃。

3 ) Reaction pressure -0.1~1.6Mpa.

4 ) Equipment Material : SS304 , SS321 , SS316L stainless steel ; Q235-B carbon steel.

5 ) Mixing type: blade type, anchor type, frame type, screw belt type, turbine type,

dispersing disc type, combination type and so on.

6 ) Heating method: the heat conduction oil circulation heating, Electric heating in jacket，

steam heating, hot water heating.

7) Transfer structure: the outer jacket, the outer half tube, inner tube.

Contact information:

If you need to know the detailed equipment configuration, production technology, production
process, please contact us.

Email：[email protected]

Mobile: 0086-181 3837 3963(WhatsApp, Wechat)

Address: Donglian Jincheng Industrial Zone, Danzao Town, Nanhai, Foshan, Guangdong, China.