Safety matters needing attention in hydrothermal synthesis reactor

Before using the hydrothermal synthesis reactor, make sure that the lower gasket of the kettle body is in the correct position (the convex side faces downward), and then put the PTFE bushing or PPL bushing and the upper gasket, first tighten the kettle cover, and then use the screw Tighten the lid of the kettle until it is tightened. When the hydrothermal synthesis reactor is installed and used, it directly contacts metal or hard objects, so care should be taken to avoid damage to the glass, and it needs to be cleaned after use so that it can be used again.

The hydrothermal synthesis reactor should be cleaned in time after each use to avoid rusting. Special attention should be paid to cleaning the sealing parts of the kettle body and the kettle cover line, and to prevent them from being bruised and damaged.