Attention details for safe use of high temperature and high pressure reactors_News_reactor | jacketed reactor | stainless steel reactor

First of all, the high-temperature and high-pressure reactor is a high-pressure reaction vessel. The operator must go through safety training before taking up the job. It is strictly forbidden to leave during the operation of the high-temperature and high-pressure reactor. In case of abnormal conditions, the exhaust gas should be cooled to ensure the safety of the equipment. When there is pressure in the kettle, it is strictly forbidden to open the lid of the kettle, so as to avoid excessive internal pressure and external impact. It is strictly forbidden to use flammable spacer materials in the high temperature and high pressure reaction kettle. Use less or disable flammable edge sealing materials such as dibutyl ester. Whether the oil cylinder is filled with oil, the sealing groove is clean and rust-free and coated with graphite powder. The surface of the sealing ring and the sealing surface of the kettle door should be Lubricate with graphite powder.

The high temperature and high pressure reaction kettle should be used in the designated place, and operate according to the instructions for use, and use it within 1/2 of the pressure. And often compare the pressure gauge with the standard pressure gauge and make corrections. For safety valves and other safety devices, use equipment that has undergone regular inspections and meets the specified requirements. Attention must be paid to the operation of the high temperature and high pressure reactor, and the thermometer should be inserted into the reaction solution accurately.