How to clean the blender?

The agitator needs to be cleaned after the usual use, so that it will be more convenient when it is used next time. Let\'s take a look at the correct cleaning method for the device.

Generally speaking, the upper end of the diversion tube will be lower than the static liquid level, and then a hole or groove will be opened on the cylinder body. After the liquid level has fallen, the fluid can still enter the diversion tube from the hole or groove. , Then the deflector will divide the cross section of the mixing vessel into two parts with the same area. The diameter of the deflector is about 70% of the diameter of the vessel. Wait until the paddle agitator is placed under the deflector. When the diameter of the container itself is relatively large, the diameter of the lower end of the deflector tube needs to be adjusted to be smaller, so that the diameter of the lower opening can be made smaller than the diameter of the stirring.

If you need a mechanical mixer, please contact us!