Acrylic acid exceeded 15,000 yuan per ton, and the valuation of 7 concept stocks was less than 20 times

Acrylic emulsion is a chemical with a wide range of applicability. It can be used as anti-seepage, anti-corrosion, anti-freezing, etc. Repair new chemical materials.

So what equipment is used to produce acrylic emulsion? Here is an introduction to the production equipment of acrylic emulsion:

The stainless steel reactor is composed of a kettle body, a kettle cover, a jacket, a stirrer, a transmission device, a shaft sealing device, and a support. The stirring form generally has anchor type, paddle type, turbine type, propeller type or frame type, etc. When the height of the stirring device is relatively large, multi-layer stirring blades can be used, or it can be arbitrarily selected according to user requirements. And set a jacket outside the wall of the kettle, or set a heat exchange surface in the vessel.

Stainless steel reactor heating is divided into (electric heating, steam heating, heat transfer oil circulation heating), etc., heating meson is divided into (water, heat transfer oil, steam), etc., according to the applicable temperature of the material, the meson is selected, and the temperature of the medium rises to the required temperature. , Through this medium heat conduction to the material in the reactor to heat up. The temperature of the jacket is controlled by a temperature measuring controller to control the heating tube to keep the temperature at a constant temperature. So as to quickly achieve the purpose of heating up the material.

JCT Machinery has specialized in reactor manufacturing since 2006.We can customize reactor professional guidance according to your requirements.If you would like to know more information about the equipment,You can contact me:Phone:+86-13929992673 whatapp:13929992673, Mailbox:[email protected], I will answer for you in detail.