Why does the reactor explode frequently?

What is a reactor?

1.The reaction kettle refers to a batch reactor with a stirring device. According to the pressure required by the process, the chemical reaction can be carried out under the conditions of open, closed, normal pressure, pressurized or negative pressure.

2.The reaction kettle refers to a batch reactorwith a stirring device. According to the pressure required by the process, the chemical reaction can be carried out under the conditions of open, closed, normal pressure, pressurized or negative pressure.

3.The reactor is one of the most commonly used equipment in the chemical industry. In recent years, the leakage, fire and explosion accidents of the reactor have occurred frequently. Because the kettle is often filled with toxic and harmful chemicals, the consequences of the accident are more serious than the general explosion accident.

4.The main reasons for the runaway reaction are: the reaction heat was not removed in time, the reaction material was not evenly dispersed and the operation was wrong.

What are the safety precautions?

1. Container inspection: Regularly check various containers and reaction equipment. If any damage is found, it must be replaced in time. Otherwise, if the experiment is carried out without knowing it, the consequences are unimaginable.

2. Pressure selection: Be sure to know the specific pressure value required by the experiment, and choose a professional pressure gauge to conduct the test within the allowable pressure range. Otherwise, the pressure will be too small and will not meet the requirements of the experimental reactor. If the value is large, it is very likely to cause danger.

3. Experiment location: Physical and chemical reactions cannot be carried out casually, especially the reaction under high pressure, which has higher requirements on the experimental location. Therefore, in the process of conducting the experiment, the experiment must be selected according to the requirements of the experiment. Place.

2.Reactor is a typical main reaction equipment in chemical production, and is widely used in the production of resin, adhesive, cosmetics and pharmaceutical products.

3.The scope of application of the reactor produced by our factory: unsaturated resin, alkyd resin, acrylic resin, 107 glue, hot melt adhesive, epoxy resin, silicone, paint, silicone oil, grease, polyurethane glue, etc.

Jin Chang Tai Chemical Machinery Co., Ltd.
welcome to our website: /
Phone:+86-13929992673 whatapp:13929992673
Mailbox:[email protected]
Thank you very much !