The stainless steel reactor blocked how to repair it

JCT machinery professional production reaction kettle for more than ten years, we know that in the chemical equipment industry, there are many kinds of stainless steel reaction kettle, common in the following several kinds:

Electric heating reactor, steam heating reaction kettle, heat conduction oil heating reaction kettle, external tube heating reactor, their use and maintenance are consistent, and stainless steel reaction kettle is also called stainless steel reaction tank. It is composed of the kettle body, the cauldron cover, the agitator, the heating and cooling jacket, the support and transmission device, the shaft seal device, the oil spill tank and the like, and is equipped with electric heating rod and temperature meter, pressure meter and so on.

The key point in daily maintenance is that the electric heating reactor should check the carbonization of the heat oil by stages, periodically emptying the carbide in time to increase the heat transfer performance and heating speed of the heat conduction oil, ensure the height of the heat transfer oil level in time. The steam heating reaction kettle should check the thickness of the steel plate regularly so as to ensure the normal use pressure. There will be no dangerous accidents. It is necessary to continuously check the liquid level and sealing device of the reducer lubricants.

Equipment running for a long time, it is inevitable that there will be some failures, then the reactor is blocked in daily use how to do?

In the process of daily use of the reactor, tube blockage often occurs. The main components of the blockage are salt, alkali and carbide. When the reboiler is blocked, the method of increasing gas consumption is usually used to ensure the production and product qualification, and increase the gas consumption (energy consumption) to cause the material to be heated carbonization, further block the tube, and the material is heated to produce chlorine ion and hydrogen ion (for stainless steel heat exchanger and stainless steel reactor, stainless steel). The reaction tank has greater corrosion, causing the equipment to corrode faster. Therefore, regular cleaning and maintenance of reboiler and stainless steel reactor can not only save energy, but also reduce the corrosion rate of the equipment and increase the service life of the equipment. JCT machinery recommends that you carry out jet cleaning for reboiler, which will generally achieve good results.

If you want to know more about stainless steel reactors, or if you want to buy reactors,Please contact JCT machinery :

Tel:+86-18028192312

E-mail:[email protected]

WhatsApp:+86-18028192312

Skype:+86-18028192312