The difference between the neutral and the horizontal of the disperser! worth collecting!

In the production of modern chemical industry, there are various kinds of equipment used. When users choose the products they produce, they do not understand the production process or do not understand the function of the equipment, which leads to low production efficiency. The difference between vertical and horizontal:

A horizontal disperser is a relatively high-speed rotation of a motor through a straight-turning tooth (or a rotor) with a matching fixed tooth (or a stator). The material being processed passes its own weight or external pressure (which can be generated by a pump). The pressure produces a downward spiral impact force, which is subjected to strong mechanical and hydraulic shears in the narrow gap between the stator and the rotor through the high kinetic energy caused by the high tangential speed and high-frequency mechanical effects generated by the high-speed rotation of the rotor. Cutting, centrifugal extrusion, liquid layer friction, impact tear and turbulence.

The vertical disperser is driven by a motor to drive a rotating tooth (or a rotor) to a relatively high-speed rotation with a matching fixed tooth (or a stator). The material to be processed passes its own weight or external pressure (which can be generated by a pump). The pressurization produces a downward spiral impact force, and the high tangential speed and high-frequency mechanical effects generated by the high-speed rotation of the rotor cause strong mechanical and hydraulic forces in the narrow gap between the stator and the rotor. Shear, centrifugal extrusion, liquid layer friction, impact tear and turbulence combine to form a suspension (solid/liquid), emulsion (liquid/liquid) and foam (gas/liquid). Therefore, the incompatible solid phase, the liquid phase and the gas phase are uniformly and finely dispersed and emulsified under the action of the corresponding mature process and the appropriate amount of additives, and the high-frequency cycle reciprocates to finally obtain a stable high-quality product. When the colloid is ground and the gap between the rotating teeth (the gap is adjustable) is subjected to strong physical effects such as shearing force, friction force and high-frequency vibration, the material is effectively emulsified, dispersed and pulverized to achieve superfine pulverization of the material. The effect of emulsification. Vertical split structure, long running time, not easy to cause the eccentricity of the shaft, easy to replace, and as long as the corresponding belt is replaced, the general personnel can operate. From the structure point of view, the vertical type is driven by a belt, and the speed can be increased by 3-6 times compared with the motor, so the effect of dispersing emulsification homogenization is better than that of the horizontal disperser.