Application of sigma blade mixer

The sigma blade kneader is the most common type. It is suitable for the kneading operation of external materials that must have a large movement in the kneading tank. It mainly acts on the arrangement of the two paddles, especially the extrusion dewatering operation, and is most suitable for the use of the sigma type impeller. Applicable materials: chewing gum, glass glue, sealant, hot melt adhesive, butyl glue, manhole cover, carbon material, etc. The kneader is usually welded to the base, placing the device directly on the ground. Users cannot easily install it.

The main maintenance and maintenance measures of the sigma blade kneader are as follows:

1. Lubricating oil should be injected into each lubricating part frequently, not less than twice per oil, lubricating grease should be injected into the oil every 20 days, and oil should be refueled every three months.

2. The wall panel seal should be properly adjusted or replaced according to the wear condition.

3. Regularly check the steam pipes and combined components. Leaks are not allowed.

4. The machine should be repaired for six months, and the vulnerable parts should be inspected and repaired or replaced as appropriate.

5. After the kneader is installed, first clean, decontaminate and wipe the anti-rust oil. Check all lubrication points and pour in grease (fat).

6. Check the tightness of the V-belt before transmission, and move the motor to a proper position by adjusting the bolts.

7. Check whether the fasteners are loose, whether the steam pipeline is leaking, and whether the circuit and electrical equipment are safe. Electrically heated kneaders must be grounded.

8. Before debugging, clean up the kneader, do a gas lift for 10-15 minutes to confirm that the machine is running normally, and then put it into production. Usually, the noise of new machine gears (including reducers) is loud in the initial stage and will naturally decrease after a while.

JCT Machinery has specialized in reactor manufacturing since 2006.We can customize reactor professional guidance according to your requirements.If you would like to know more information about the equipment,You can contact me: Phone:+86 13929992673 whatsapp:13929992673, Mailbox: [email protected], I will answer for you in detail.